Model MS-5000 Digital Portable Ultrasound Unit
Application: Abdomen, GYN & OB, small parts, etc.
Main Specification
Probe element: 80 elements
Scanning mode: convex, linear
10.4' high resolution TFT LCD
Standard probe: 3.5MHz convex multi-frequency probe
(Frequency conversion scope:2.0 / 2.5 / 3.5 / 5.0 MHz)
Optional probe: 6.5MHz intra-vaginal frequency conversion probe.
(frequency conversion scope: 4.0 / 5.0 / 6.5 / 7.5 MHz)
Optional probe: 7.5MHz frequency conversion probe.
(frequency conversion scope: 5.0 / 6.5 / 7.5 / 9.0 MHz)
Optional probe: 5.0MHz micro-convex frequency conversion probe.
(frequency conversion scope: 3.5 / 4.5 / 5.0 / 5.5 MHz)
Scanning angle: convex probe 60°, intra-vaginal probe 135°
Body mark: 64 kinds body mark with probe position
Probe socket: 1 socket, automatically identify the probe
Resolution: horizontal≤2mm,vertical≤1mm
Dead zone≤5mm (test report actually≤4mm)
Max scanning depth: ≥17cm (test report actually≥19cm)
Geometry position precision: Transversa≤10%, Longitudinal≤5%(test report actually≤5%, Longitudinal≤5%)
Scanning mode: B/2B/4B /B/M/M
8 grades depth adjustment under full visual field (8kinds of magnification)
Gain:0~127DB
Dynamic scope: 27~90dB,visible & adjustable
Four different angles / switchable width
Gray: 256
Imaging technique: full digital beam-composite, continuous dynamic focusing, dynamic aperture
Cine loop: 256 frames
Permanent image storage: 100 frames
TGC control: near field, far field
Image processing: pre-process (continuous dynamic focus, dynamic aperture, dynamic filter), post-process (4 grades gamma correction),frame correlation, black/white reversal, left/right reversal, up/down reversal, edge enhancement, etc.
Depth hoist / local zooming
Frame frequency: 30 frames/s
Measurement and analysis:
Normal measurement: distance, circumference, area, heart rate, gestational week, fetus weight, volume, EDD etc.
Obstetric measurement: BPD, CRL, GS, FL, HL, TAD,TBD, APBD, HC, AC, GA,EFW, FT, LV THD, TCD, OFD
Report: OB report
Note: name, age, gender, hospital name, time, date, probe type, frequency, focus, frame correlation, gain, dynamic scope, etc.
Battery: 2700MAh lithium battery (2 pcs) can work for more than 200 min each charge.
Weight of main unit:2.25kg.
Puncture guide, with two approvable guiding lines whose angle and position can be adjustable.
USB port for flash disk to store images directly and for transferring image to PC (optional software of case report process center)
Output: PAL / NTSC
Power supply:85V~242V,48~62HZ
Energy-saving
8 kinds internal pseudo color
Standard Configuration:
Main unit: 1 PC
3.5MHz multi-frequency convex probe 1 PC
Probe socket 1 PC
USB port 1 PC
Optional configuration:
6.5MHz transvaginal probe
7.5MHz high frequency linear probe
5.0MHz micro-convex probe
Thermal printer
Software of case report process center
